1. Connect to ABB charger

  • Download the TerraConfig app.
  • Press “Configure a charger” in the application.
  • Scan and select charger, enter PIN when prompted.
  • When the charger is connected, see this view.


 

 

 

 

2.Internet connection

  • On the settings page, press “Connections” and configure the Internet connection to the charger, either cable, wifi or 4G. If you use 4G, a data SIM card must be inserted into the device.
  • Wait until the device is connected to the Internet: the second indicator light on the charger is constantly green.
  • Skip this step if your device is already connected to the Internet.


 

 

 

 

3. Remove “Free vending”.

  • On the settings page, select “Free vending” and make sure it is disabled.


 

 

 

 

4. Connect to KotiCharge backend

  • On the settings page, press “OCPP server”.
  • In the new window, select the option “Enable External Server” and then select “Available Servers”.
  • In the new window, find BescoInc, select it and press “Download”.
  • After that “Server Info” will appear:https://ocpp.koticharge.link:443 . Press “Save” to save the settings.

5. Enter the charger ID.

  • Finally, find the charger ID (as shown on the picture in the red box) and inform KotiCharge about the charger ID via filling out the contract form on our website.
  • Please note that at this stage your charger is not yet connected to KotiCharge, it is waiting for our approval.
  • KotiCharge will notify you when the chargers are ready for use, normally within 1 hour.
  CONTACT US

Your EV Load Balancing is here!