1. Prerequisites 

  • Make sure that the charger is connected to the internet
  • Make sure that authentication is always required to start charging. If there’s an option to start charger instantly without authentication then it should be disabled.

2. Configuration

  • Enable OCPP protocol:
  • Open the Go-e app. Open the “Internet” tab and go to “OCPP”.
  • Enable OCPP 1.6 with a switch.
  • Change to OCPP Server URL: wss://ocpp.koticharge.link/goe######
  • The numbers (#) are the same as in the Hotspot SSID.

3. Inform Koticharge about the Charger ID

  • Finally, find the charger ID and inform KotiCharge about the charger ID via filling out the contract form on our website.
  • Please note that at this stage your charger is not yet connected to KotiCharge, it is waiting for our approval.
  • KotiCharge will notify you when the chargers are ready for use, normally within 1 hour.


 

 

 

 

  CONTACT US

Your EV Load Balancing is here!